Join Baby Joy Club & Earn Points! Learn more

Pick-up available 🚚 Skip delivery! Shop location: TRUGANINA

Baby Joy Bonus: 3% OFF

babyjoy3
BABYJOY ✳ BLACK FRIDAY CLUB

Black Friday Lucky Spin

Line up BABYJOY to win 10% off.

Enter your email to unlock the reels & win 10% off.

1 in 10 chance to win. Coupon valid through Dec 1.

Assembly & Setup Guide

How to Set Up Your BabyJoy 10-in-1 Slide and Climber Playset

A little assembly, a whole lot of play. Follow this step-by-step visual guide to assemble your BabyJoy 10-in-1 indoor slide and climber playset safely and securely.

Ages 3+Capacity: 20kgIndoor Play10-in-1 Multi-Activity
How to Set Up Your BabyJoy 10-in-1 Slide and Climber Playset

Quick tips on pieces

Unpack all panels and screws onto a soft play mat or carpet to prevent scratches. Sort the screws and nuts by letter (A to T) before starting.

Make room for play

Clear a flat, level indoor area of at least 2.5m x 2m. Ensure there is plenty of clearance around the slide landing zone and surrounding furniture.

Everything in its place

Check that all main HDPE panels (numbered 1 through 17) and screw connectors (A through T) are present before assembly.

Everything in its place

UY10189 Parts & Fittings Overview

1

Build the ladder

Connect parts 1 and 2 using nuts A, following the diagram. Check the exact orientation and fixing points against step 1 in the full manual.


Build the ladder
2

Secure the ladder

Secure part 2 using nuts A, as shown. Check the exact orientation and fixing points against step 2 in the full manual.

Secure the ladder

Select to enlarge

3

Assemble the slide

Connect parts 3, 4, 5 and 6 with nuts B. Check the exact orientation and fixing points against step 3 in the full manual.

Assemble the slide

Select to enlarge

4

Fit the opposite side

Install parts 5 and 6 on the other side using nuts B. Check the exact orientation and fixing points against step 4 in the full manual.

Fit the opposite side

Select to enlarge

5

Secure both sides

Use fittings D and B at the positions shown. Check the exact orientation and fixing points against step 5 in the full manual.

Secure both sides

Select to enlarge

6

Install part 7

Position part 7 as shown in the manual. Check the exact orientation and fixing points against step 6 in the full manual.

Install part 7

Select to enlarge

7

Fit part 8

Install part 8 and secure with nuts C. Check the exact orientation and fixing points against step 7 in the full manual.

Fit part 8

Select to enlarge

8

Add part 9

Install part 9 and secure with nuts C. Check the exact orientation and fixing points against step 8 in the full manual.

Add part 9

Select to enlarge

9

Add the lower supports

Install part 10 at the bottom and secure with nuts C. Check the exact orientation and fixing points against step 9 in the full manual.

Add the lower supports

Select to enlarge

10

Fit part 11

Install part 11 using fittings E and C. Check the exact orientation and fixing points against step 10 in the full manual.

Fit part 11

Select to enlarge

11

Install part 12

Secure part 12 with nuts C. Check the exact orientation and fixing points against step 11 in the full manual.

Install part 12

Select to enlarge

12

Install part 13

Secure part 13 with nuts C. Check the exact orientation and fixing points against step 12 in the full manual.

Install part 13

Select to enlarge

13

Install part 14

Secure part 14 with nuts C. Check the exact orientation and fixing points against step 13 in the full manual.

Install part 14

Select to enlarge

14

Connect parts 13 and 15

Connect these parts using nuts C. Check the exact orientation and fixing points against step 14 in the full manual.

Connect parts 13 and 15

Select to enlarge

15

Fit part 10

Install part 10 and secure with nuts C. Check the exact orientation and fixing points against step 15 in the full manual.

Fit part 10

Select to enlarge

16

Fit part 11 with nuts C

Install part 11 and secure with nuts C. Check the exact orientation and fixing points against step 16 in the full manual.

Fit part 11 with nuts C

Select to enlarge

17

Attach the ladder

Join the assembled ladder using nuts C. Check the exact orientation and fixing points against step 17 in the full manual.

Attach the ladder

Select to enlarge

18

Join the two sections

Secure the assembled sections using nuts C at the illustrated points. Check the exact orientation and fixing points against step 18 in the full manual.

Join the two sections

Select to enlarge

19

Finish the accessories

Secure part 16 and parts G and M, as shown in the final diagram. Check the exact orientation and fixing points against step 19 in the full manual.

Finish the accessories

Select to enlarge

Your questions, answered

What is the recommended age and weight limit?

Designed for children aged 3+ years old, with a maximum weight capacity of 20 kg on the slide and platform.

Can this playset be used outdoors?

This playset is intended for indoor use on a flat surface or play mat. If used outdoors temporarily on dry days, store indoors to prevent UV weathering.

How do I clean and maintain the HDPE panels?

Wipe clean regularly with a damp cloth and mild soapy water. Periodically check that all plastic nuts (fitting C) remain snug.

Ready to make room for play?

Once all fittings are tightened and checked, your little one is ready to climb, slide, and explore their new indoor playground!

View 10 in 1 Toddler Slide Set...